Eclipse AVN726EA Owner's Manual page 204

Others
About the Steering Wheel Switches
Touch
5
Store
Select screen is displayed.
● Touch
to return to the immediately
preceding screen.
6
Touch the command you wish to set.
● Next page is displayed by touching
or .
While pressing the steering switch
7
button to record, touch the
until a beep sounds.
● It will display Completed when the setting
is completed, then it will return to
Command Select screen and displays
Store on the set command.
● "Error, try once again" is displayed when
the data reading fails.
202
202
until the Command
Store
● Touch
to return to the immediately
preceding screen.
Assign the desired functions to the
8
steering wheel switch buttons by
repeating Steps 6 through 7.
9
Touch
Finalize
Touch after confirming the final
10 Done
confirmation screen.
● Touch
to return to the immediately
preceding screen.
ATTENTION
If "Error, try once again" is shown on the
display, once again select a desired function to
set.
.