Selecting From City Center - Eclipse AVN726EA Owner's Manual

Navigation Guidance
Navigation Guidance
6
Touch [<Street Name>].
● Start entering the street name on the
keyboard.
● After entering a couple of characters, the
names that match the string appear in a
list.
● Touch [Done] to open a list of results
before one appears automatically.
7
Select the street from the list.
8
Touch [Intersection].
● If only a few intersecting streets exist, a list
of them appears immediately.
● For longer streets, a keyboard screen
appears. Start entering the name of the
intersecting street on the keyboard. As you
type, if the matching streets can be shown
on one screen, a list of them appears
automatically.
Touch the desired intersecting street
9
in the list.
The map appears with the selected
10
point in the middle. From the Cursor
menu, touch [Set as Destination]
(Advanced mode). The route is then
automatically calculated, and you can
start navigating.
94
94

■ Selecting from city center

The City Center is not the geometric center of
the city but an arbitrary point the map
creators have chosen. In towns and villages,
it is usually chosen to be the most important
intersection. In large cities, it is an important
intersection.
Touch the following switches: [Find],
1
[Find Address] (Advanced mode).
By default, Navigation proposes the
2
country/state and city where you are. If
needed, touch the switch with the
name of the country/state, and select a
different one from the list.
3
If needed, change the city.
● To select the city from the list of recently
used ones, touch the
Touch the following switches. After
4
changing the country/state, touch
[<Enter Suburb/Town Name>].
● Start entering the city name on the
keyboard.
● After entering a couple of characters, the
names that match the string appear in a
list.
● Touch [Done] to open a list of results
before one appears automatically.
5
Pick the city from the list.
switch.