Setting From Address; Entering Address - Eclipse AVN726EA Owner's Manual

Navigation Guidance
Navigation Guidance

Setting from Address

If you know at least a part of the address, this
is the quickest way to select the destination of
the route.
Using the same screen, you can find an
address by entering:
● The exact address, including house
number
● A city center
● An intersection
● The midpoint of a street
● Any of the above, starting the search with
the Postcode (See page 95)

■ Entering Address

In some countries, a state name may be
included in the address. If Australia is
selected, 5 lines appear on the screen.
If New Zealand is selected, 4 lines appear on
the screen.
Touch the following switches: [Find
1
Address] (Advanced mode)
90
90
By default, Navigation proposes the
2
country/state and city where you are. If
needed, touch the switch with the
name of the country on it, and select a
different one from the list. When
selecting a new country, you need to
either select a state or, to search for a
city regardless of your current state,
touch [<All states>].
Even when you do not change
3
countries, you may change state or
suburb. Touch the state name or
suburb name switch, and select from
the list.
4
If needed, change the city.
● To select the city from the list of recently
used ones, touch the
Touch the following switches. After
5
changing the country/state, touch
[<Enter Suburb/Town Name>].
● Start entering the city name on the key
board.
● After entering a couple of characters, the
names that match the string appear in a
list.
● Touch [Done] to open a list of results
before one appears automatically.
6
Pick the city from the list.
switch.