Saving Station In Memory; Manual Saving; Automatic Saving - Eclipse AVN726EA Owner's Manual

Saving Station in Memory

You can save a radio station in memory in the
auto or manual mode.

■ Manual saving

Select a station you wish to save by
1
Manual tuning or Auto tuning.
Touch and hold the preset switch for at
2
least 1 second.
● The selected station will be saved, and the
preset channel number and frequency will
be shown on the display.
● To manually set additional selected
stations for the remaining preset channels,
repeat this procedure for each channel.
● Six stations can be memorized for each of
FM 1, 2 and 3, and six stations can be
memorized for AM, making a total of 24
stations.
● If the stations have been stored in
memory, a station can be selected and
received by the touching the appropriate
preset switch.
139

■ Automatic saving

IMPORTANT
● You can select a station by simply touching
a preset switch (any of [1] to [6]). The
frequency of the selected station appears.
● When you save a new station in memory,
the existing station is cleared to make way
for it.
● If fewer than six stations can be received,
the left over switches retain their original
settings.
Touch
1 Auto.P
second.
● A search will be conducted from the lowest
frequency through progressively higher
frequencies, and stations with sufficiently
strong reception will be memorized for
preset registration numbers [1] to [6]. The
registration procedure
completed, a beep sounds twice and the
station memorized last (i.e. the one
memorized for P6) will continue to be
received. Subsequently, when you listen to
the radio you will be able to select stations
by calling up preset numbers.
for at least one
has been
139