Statistics: Received Bit Rate And Frame Rate; Figure 4-11 Video Codec Settings - Honeywell HD3HDIH User Manual

HD3 EQUIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
Setting Options
Compression Minimum, Low,
Ratio Medium, High,
Maximum
Target Bit 250 – 6000 kbps
Rate (kbps)
GOP (No. of 1– 50
Frames)
Statistics are received for the current image in real time when Received is enabled.

Statistics: Received Bit Rate and Frame Rate

Document 800-07361V3 Rev A
11/2011
Table 4-4 Compression Settings(cont'd)
Description
When Quality is selected as the Priority, select the Compression Ratio.
Minimum is the highest visual quality; Maximum is the lowest visual quality.
Enter the Target Bit Rate in kbps (kilobits per second) which represents the
amount of data processed per second.
Select the GOP (Group of pictures) number from 1 to 50. (Not available on the
Secondary Stream.)
Figure 4-11 Video Codec Settings
Set the Resolution for NTSC or PAL video signals.
3. Click Apply. Adjustments in your compression settings are captured in the statistics.
As you make adjustments, the Statistics field acts as a visual reminder of how your
settings affect the bit rate, frame rate, and bandwidth usage.
4. When you are satisfied with your settings — that is, that the image quality and
bandwidth usage meets your requirements — click Apply to save your settings.
Settings are not saved unless you click Apply.
To view in real time the received bit rate and frame rate statistics of the current image:
1. Click the Compression Settings tab.
2. In the Statistics area, select the Received check box.
57