Primary Stream Video Codec Settings; Secondary Stream Video Codec Settings; Figure 4-9 Primary Stream Video Codec Settings; Figure 4-10 Secondary Stream Video Codec Settings - Honeywell HD3HDIH User Manual

HD3 EQUIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide

Primary Stream Video Codec Settings

Secondary Stream Video Codec Settings

Document 800-07361V3 Rev A
11/2011
Figure 4-9 Primary Stream Video Codec Settings
Click on the Secondary Stream tab. A warning message appears: The secondary
stream is disabled. To enable, select compression settings tab and
configure secondary stream.(HCD5HIH only)
You will have access to the Secondary Stream Video Codec Settings.
Figure 4-10 Secondary Stream Video Codec Settings
Note Enabling the secondary (MJPEG) stream disables the local video out (aim
and focus). (HCD5HIH only)
Default settings shown for NTSC models
Set the Resolution
Set the Frame Rate
Set the Priority to Quality, or Bit or Frame Rate
Set the Compression Ratio
Set the Target Bit Rate
Set the Maximum Bit Rate (kbps)
Set the GOP (Group of Pictures)
Default settings shown for NTSC models
Enable/Disable the secondary stream
Set the Resolution
Set the Frame Rate
Set the Priority to Quality, or Bit or Frame Rate
Set the Compression Ratio
Set the Target Bit Rate
Set the Maximum Bit Rate (kbps)
55