Installation and Setup
Unpack Everything
Equipment Required
Overview of Installation Procedure
16
Check that the items received match those listed on the order form and packing slip. The
HD3 series camera packing box should include, in addition to a Quick Install Guide:
•
One fully-assembled HD3 series camera, including factory-installed BNC connector
for local video out aim and focus
•
One adapter plate
•
One HD3 series camera hardware kit that includes mounting screws and screw caps
•
One BNC cable for local video out - aim and focus
•
One mounting template
•
One product warranty
•
One DVD containing the software and this User Guide
If any parts are missing or damaged, contact the dealer from which you purchased your
camera or call Honeywell Customer Service (see
The following tools might help you to complete the installation:
•
Drill
•
Screwdrivers
•
Wire cutters
Note
Please familiarize yourself with the installation procedure and complete each
step in the exact sequence given.
The initial installation of your HD3 series camera consists of the following steps:
Step
1
Preparation
2
Connect the wiring.
Mount the camera.
Warranty and Service
on page 11).
See ...
page 19
page 20
page 25