Mounting The Camera - Honeywell HD3HDIH User Manual

HD3 EQUIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide

Mounting the Camera

Document 800-07361V3 Rev A
11/2011
Surface Mount
1. Secure the skirt to the ceiling (hardware
not supplied) or to the wall using the
supplied screws.
Note You must use screws that are able to
support at least three times the weight
of the camera.
2. Connect the wires (see
Wires on page 20).
3. Rotate and align the camera assembly
yellow label with the skirt yellow label.
4. Secure the camera assembly to the skirt by
pushing it into the skirt, then twisting it
clockwise until it clicks securely in place.
5. Secure the camera assembly to the skirt by
twisting it clockwise until it clicks securely
in place.
6. Adjust the camera's field of view (see
page 26).
7. Install the turret by clicking it into place.
8. Install the bubble by placing it on the camera with the tabs to the left of the slots, then
turning it clockwise until the tabs click securely into place.
Connecting the
Adjusting the Camera FOV (Field of View)
Skirt
Screws
(supplied)
Camera
assembly
Turret
Dome bubble
on
25