Resetting The Device; Figure 4-7 Ip And Firmware Settings: Device Information Tab - Honeywell HD3HDIH User Manual

HD3 EQUIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide

Resetting the Device

Document 800-07361V3 Rev A
11/2011
Figure 4-7 IP and Firmware Settings: Device Information Tab
Device Name as entered in the IP
Utility program
IP Address on the network
(DHCP/Static/APIPA)
Subnet Mask and Default Gateway
address that connects the camera to
the network
MAC Address is a factory assigned
address unique for each device
Firmware Settings including
product name and version
Video Output - Enable or disable local
video out to a spot monitor. HD3HDIH(X)
only.
Note
Enabling Local Video Out will
disable to the secondary video
stream.
Video Format - NTSC or PAL
Select a location for saving Snapshots
You can choose from Restart, Restore, and Reset to Defaults. See
these functions take approximately 2 minutes to complete, and during that time, the camera
will lose connection to the web client. You will be asked if you wish to proceed before the
action occurs.
Restart Restarts the camera while maintaining the existing configurations.
Restore Resets the camera to the factory defaults, except the network settings.
Reset to Resets the camera to the factory defaults, including the network
Defaults settings.
Figure 4-7. Each of
53