Table of Contents
Advertisement
HD3 EQUIP Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
Step 5: Launch the Web Client to View Live Video
Document 800-07361V3 Rev A
11/2011
Note
After the IP Utility software is installed for the first time, you can change the
Administrator or Guest passwords and upgrade firmware.
Note
It is important to click Apply in order to save any configuration change.
1.
Log onto the web client. There are two ways to launch the web client and log on— via
the Honeywell IP Utility Program or directly from Internet Explorer.
Honeywell IP Utility
a.
Log onto the Honeywell IP Utility program.
b.
From the Discovery pane, click to select the device to launch its browser.
c.
To enable or disable the HTTP server, select or clear the Enable HTTP Server
check box. By default, the HTTP server is enabled.
d.
From the System tab, click Launch Browser.
The web client application for the selected device opens in Internet Explorer.
Internet Explorer
From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the
Address bar to open the logon window.
2.
Select a User Name and enter a Password.
a.
From the User Name drop-down list, select Administrator or Guest.
b.
In the Password field, enter the case-sensitive password.
•
The default Administrator password is 1234.
•
The default Guest password is guest.
c.
Click
.
3.
A signed version of ActiveX® control is installed when you use the web client to
discover connected devices for the first time. If you have a previous version of IP
ActiveX is installed, you are prompted to upgrade to Honeywell secure ActiveX
control.
41
Hide quick links:
Advertisement
Table of Contents
