Motorola M12 Oncore User Manual page 78

Motorola GPS Products
M12 Oncore User' s Guide Supplement
Revision 1.0 01/25/00
ID TAG
This message sets or defaults the ID tag. The ID tag shall be remembered through
power cycles if battery back-up is provided.
If all six ASCII characters or ID tag are pluses (+), the ID tag will be the receiver
serial number read out of the manufacturing data block. If all six are spaces, the ID
tag will remain unchanged. Any other combination of ASCII characters (from 0x20
to 0x7e) will be construed as a new ID tag. Any out of range character will also
cause the ID tag to remain unchanged.
The ID tag is also output in the 12-channel Position/Status/Data Message (@@Ha).
status message.
Default value: Receiver Serial Number
78