Comtim; Ppscon - Motorola M12 Oncore User Manual

Combined Time

comtim

1PPS Control

ppscon

Motorola GPS Products
M12 Oncore User' s Guide Supplement
Revision 1.0 01/25/00
COMMAND DESCRIPTIONS
Function Changes the current date, time and GMT offset of the
12 Channel Oncore receiver. If the date or time is not specified,
this command requests that the receiver output the current date
and time.
Syntax comtim (MM DD YY hh mm ss [ - | + | ] hh mm)
Example comtim 9 29 00 23 23 23 –7 0 <ENTER>
Notes If the receiver has acquired at least one satellite, the receiver
ignores the changed time and date and responds with the current
time and date. The receiver output time is either GMT or local
time, depending on the setting of the GMT offset parameter.
See Also None
Binary Equivalent @@Gb
Function Controls how the 1PPS output in the receiver will behave.
Syntax ppscon ([ 0 | 1 | 2 ])
Example ppscon 1 <ENTER>
Notes None
See Also None
Binary Equivalent @@Gc
MM month
DD day
YY year
hh hour
mm minutes
ss seconds
hh hour of GMT offset
mm minute of GMT offset
date 9/29/2000
time 23:23:23
GMT Offset -7:00 hours
0 = 1PPS disabled
1 = 1PPS on continuously
2 = pulse active only when tracking at least
one satellite
122