Locate your favorite restaurant, nearest bank, or see businesses and other locations along your route. Save time and gas, and leave getting lost to the past. The MOTONAV TN20 includes: • Turn-by-turn navigation with 2D and 3D display modes •...
For traffic safety reasons, it is recommended that routes should be planned in a stationary vehicle before starting a trip. MOTOROLA IS NOT RESPONSIBLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, SPECIAL, OR PUNITIVE DAMAGES, OR OTHER DAMAGE ARISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT.
You can safety secure your MOTONAV TN20 in your car using the included mounting holder. Slide holder down onto the extension arm. Affix suction cup on extension arm to the windshield (push up on lever). mount it You can also affix suction cup to the dashboard using the included Note: circular disc (not shown).
Once mounted, apply power to your MOTONAV TN20 using the included car charger. Plug the charger into the power outlet in your vehicle. Plug the charger into the USB port on your device. When plugged into a charger, the indicator light is orange to indicate the device’s internal battery is charging.
To get started, you need to turn on your MOTONAV TN20 and configure initial device settings: Press and hold Power button to turn on the device until the display becomes active. After a few moments, a configuration wizard appears to provide step-by-step setup instructions.
use map view screen The map view screen provides your main view when driving to your destination. Tap the screen icons to control the map view and perform other tasks. 1 zoom map in and out 2 display main menu 3 change map view (2D or 3D) 4 change/mute volume 5 heading indicator...
use route screen Once you’ve mapped your route, the map view screen displays your route details. lane information next turn current location route status bar Tap the route status bar to switch between viewing: • travel distance, time remaining, and estimated time of arrival, •...
Power button. • If your MOTONAV TN20 is not used for more than 7 days, it enters a power saving mode that requires a Power button press to exit.
All features, functionality, and other product specifications, as well as the information contained in this user’s guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation.