Utc Offset Status - Motorola M12 Oncore User Manual

Motorola GPS Products
M12 Oncore User' s Guide Supplement
Revision 1.0 01/25/00

UTC OFFSET STATUS

This message allows the user to request the UTC offset that is currently being used
in the time solution. The value reported is the integer number of seconds between
UTC and GPS time. If the offset is zero, the receiver does not currently have the
portion of the almanac that contains the UTC parameters. The UTC parameters are
broadcast by the satellites as part of the almanac, which is repeated every 12.5
minutes.
The message can be set to output either once (polled), or any time the UTC offset
has been updated or changed from its previous value.
Default mode: Polled
52