Motorola M12 Oncore User Manual page 26

Motorola GPS Products
M12 Oncore User' s Guide Supplement
Revision 1.0 01/25/00
ALTITUDE-HOLD HEIGHT
The user can specify the receiver height for manual altitude-hold applications. Use
the Position Control (@@Gd) command to enable or disable the altitude-hold
feature. The Altitude-Hold Height is specified in units of meters to a resolution of
0.01 meters. The height is referenced to the GPS reference ellipsoid. The datum for
the height is the one selected using the Select Datum command.
Default value: 0 m
26