MOTONAV
TN20/TN30
User's Guide

   Related Manuals for Motorola MOTONAV TN20

   Summary of Contents for Motorola MOTONAV TN20

  • Page 1

    MOTONAV ™ TN20/TN30 User’s Guide...

  • Page 2

    • Save time and gas—Get there quickly and avoid getting lost. Your MOTONAV TN20/TN30 helps you find the best route with GPS accuracy. If you miss your turn, it will show you how to get back on track. Select between fastest and shortest modes, or bypass tolls, if you prefer.

  • Page 3: Map View Screen

    Map View Screen Map Control Icons Here’s a quick guide for using the map view screen icons to control operation.

  • Page 4

    Tap to display main menu screen. Tap to change map view display (3D or 2D). Tap to adjust/mute/unmute volume. Heading indicator. Current street indicator (if GPS connection). If not, tap to display GPS Information screen. (TN30 only) Tap to make a handsfree call. Battery indicator:...

  • Page 5: Route Screen

    Route Screen Here’s a quick guide for using the map view screen to view and control route information. lane information next turn current location route status bar next street route...

  • Page 6

    Tap the route status bar to switch between viewing: • travel distance, time remaining, and estimated time of arrival, • current street name, or • current speed and altitude. Tap the next street bar to display route menu to: • display driving directions, •...

  • Page 7

    Motorola reserves the right to change or modify any information or specifications without notice or obligation.

  • Page 8

    For traffic safety reasons, it is recommended that routes should be planned in a stationary vehicle before starting a trip. MOTOROLA IS NOT RESPONSIBLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, SPECIAL, OR PUNITIVE DAMAGES, OR OTHER DAMAGE ARISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT.

  • Page 9: Table Of Contents

    ... . 26 view GPS information ..28 install new maps ..29 settings ....30 set your language .

  • Page 10: Get Started, Components

    MOTONAV TN30 and TN20. MOTONAV TN30 components touch display screen Power button (on side) microphone speaker (on reverse side) Reset button (on side) MOTONAV TN20 components touch display charger port indicator light charger port memory card slot...

  • Page 11: Initial Setup, Power & Charging

    initial setup Before you navigate with your TN20/TN30, you need to perform the following initial setup steps: Mount in your vehicle. Apply power using car charger. Turn on and configure initial settings. Find satellite signal to obtain your location. For details on performing these steps, see the Quick Start Guide included in the box.

  • Page 12: Map View Screen

    • Using another charger to charge your TN20/TN30 may not be as effective. • The included car charger will not power Motorola phones. map view screen When you turn on your TN20/TN30, you always see the map view screen.

  • Page 13: Main Menu Screen

    main menu screen From the map view screen, tap the Menu button to access the main menu screen. get started From the main menu, you can access all TN20/TN30 operations: Lets you create and manage destination routes on your TN20/TN30. TN30 Displays map view screen with route and map control options.

  • Page 14: Navigation

    navigation To navigate around TN20/TN30 menus and text entry screens, use the right and left arrows at the top: previous screen go to map view screen From a menu screen, you can easily return to the map view screen by tapping Map in the lower-right corner. From the map view screen, tap Menu to see the main menu.

  • Page 15: Routes, Create A Route

    routes create a route go to an address To create a route to an address: From the main menu: Tap Go!. Tap Address. You see: routes Note: To change state of destination, tap Change and select new state. See “search and select item”...

  • Page 16

    go to an intersection To create a route to an intersection: From the main menu: Tap Go!. Tap Address. You see: Note: To change state of destination, tap Change and select new state. See “search and select item” on page 22 for details on searching using the keyboard screen.

  • Page 17

    go to home location To create a route to your home location: Note: To set your home location, see “set home location” on page 20. From the main menu: Tap Go!. Tap Home to generate route. A route screen appears. go to recent location To create a route to a recent location: From the main menu:...

  • Page 18

    go to a business or other point of interest To create a route to your favorite restaurant, nearest gas station, or to see what is available along your route: Tap Go!. Tap Food, Fuel, Lodging and More. You see: Select location to search near: •...

  • Page 19: Manage A Route

    • To search for a business by name, tap Spell Place to search for and select a business. Tap Go to generate route. A route screen appears. manage a route select route options To select route type (quickest, shortest), and road types to avoid when generating a route: From the main menu: Tap Settings.

  • Page 20

    create route detour You can select a detour distance to instruct your TN20/TN30 to calculate an alternate route. For example, if you know there is traffic for the next three miles, you can have your TN20/TN30 calculate a detour that takes you off your current route and then returns you back to that route after a distance of three miles.

  • Page 21: Set Home Location

    • Select Avoid to recalculate route to avoid selected step. • Select Route to view overall route on map. view route map overview To view a map of the complete route: From the route screen: Tap next street bar. Tap Route Overview. You see: The distance and estimated time of arrival are displayed at the bottom of the screen.

  • Page 22: Cancel A Route

    Tap Home. You see: Search for and select an address (city, street, and address number) by tapping Set Address. Tap OK. set favorite location To set a favorite location: From the map view screen: Tap favorite location on map. You see a pop-up menu: Tap Save from pop-up menu to save destination under My Locations in Settings.

  • Page 23: Use The Keyboard

    use the keyboard A keyboard screen is provided to search and select items as well as enter text with your TN20/TN30. search and select item To search for and select from a list of items (such as cities or streets), you can: •...

  • Page 24: Text Entry

    text entry To enter text (such as when saving a location), tap keys to define entry. Tap OK to save entry. Note: The selector field (displayed below the text entry field) is provided for some text entry tasks. Use this to select which folder to save item (in My Locations under Settings).

  • Page 25: Maps, Map Display Controls

    maps map display controls zoom in and out on map To zoom in to view a smaller area with more detail, tap on map. To zoom out to view a large area with less detail, tap on map. select map view You can choose between two map views by tapping the map view icon: 3D map view with forward direction at top...

  • Page 26

    select map display options To choose the items (buttons, bars, icons) displayed on the map view screen: From the main menu: Tap Settings. Tap Map. You see: Tap checkbox to select/unselect map display items. Tap OK. The main menu screen appears. select map display icons To choose businesses and other icon types to display on the map:...

  • Page 27: Manage Maps, Browse Map

    • To refresh map list, tap Refresh. • To permanently delete a map from your TN20/TN30, tap Delete. browse map browse from current location To disconnect GPS and browse map from current location: From main menu: Tap Settings. Tap Free Map Browsing. You see:...

  • Page 28

    Tap Yes to turn off GPS and place TN20/TN30 in browse map mode. To exit browse mode and turn on GPS, tap bottom bar. browse from a specific location To disconnect GPS and browse map from specific location: From main menu: Tap Go!.

  • Page 29: View Gps Information

    To view current GPS information: From the main menu: Tap Settings. Tap GPS Info. • When you have a GPS connection, you see a screen like shown below: maps • When you do not have a GPS connection, you see a screen like shown below.

  • Page 30: Install New Maps

    install new maps To install new maps onto your TN20/TN30, do the following: Insert SD card containing new maps into SD card slot. Press and hold Power button for at least 8 seconds to power down your TN20/TN30. Press and hold Power button until the display becomes active to turn on your TN20/TN30.

  • Page 31: Settings, Set Your Language, Set Your Time Zone

    Tap arrows to select languages for display and voice prompts. Tap OK. set your time zone To select the time zone for your TN20/TN30. Note: Time is automatically set from the GPS signal. From the main menu: Tap Settings. Tap Time. You see:...

  • Page 32: Set Your Units Of Measure, Set Keyboard Type

    Tap arrows to select time zone. To allow TN20/TN30 to adjust for daylight savings, tap Adjust for Daylight Savings checkbox. Tap OK. set your units of measure To select the preferred measurement units for your TN20/TN30: From the main menu: Tap Settings.

  • Page 33: Set Voice Prompts, Connect To Your Phone For Handsfree Calls (tn30 Only)

    Tap Display. You see: Tap keyboard type to use. Tap OK. set voice prompts To enable/display specific TN20/TN30 voice prompts: From the main menu: Tap Settings. Tap Prompts. You see: Tap checkbox to select/unselect a voice prompt. Tap OK. connect to your phone for handsfree calls (TN30 only) From the main menu:...

  • Page 34

    Turn on the Bluetooth feature on your Bluetooth phone. Tap Settings. Tap BlueTooth Settings. You see: Tap Pair Mode. You see: Place phone in Bluetooth search mode. Select MOTONAV TN30 from search results on your phone. Select OK or Yes to pair your device with your phone.

  • Page 35

    manage paired phone list (TN30 only) view paired phone list From the main menu: Turn off any Bluetooth devices previously paired with your device. Turn on the Bluetooth feature on your Bluetooth phone. Tap Settings. Tap BlueTooth Settings. You see: Tap Phone List.

  • Page 36

    Tap BlueTooth Settings. You see: Tap Phone List. You see: Tap phone to delete, then tap Delete. Tap Yes to confirm deletion of phone from the TN30’s memory. connect/disconnect to/from phone from list From the main menu: Turn off any Bluetooth devices previously paired with your device.

  • Page 37

    Tap Phone List. You see: Do one of the following: • To connect to a phone, tap phone to connect, then tap Connect. • To disconnect from a connected phone, tap phone to disconnect, then tap Disconnect.

  • Page 38: Handsfree Calls (tn30 Only), Answer A Call, Reject/ignore A Call

    handsfree calls (TN30 only) These features are only available when a handset device (such as your phone) is connected to the MOTONAV TN30 via Bluetooth. Once your TN30 is paired with your phone (see “connect to your phone for handsfree calls (TN30 only)”...

  • Page 39

    make a call using dialing From map view or main menu screen: Tap Call. You see: Tap phone number you want to call. Tap Dial. You see: When call is connected, the following appears: make a call using phone voice commands From map view or main menu screen: Tap Call.

  • Page 40

    Follow prompts to place call. When call is connected, the following appears: make a call using redial From map view or main menu screen: Tap Call. You see: Tap Redial. You see: When call is connected, you see the following displayed: make a call using recent call list From map view or main menu screen:...

  • Page 41: Mute/unmute A Call

    Tap Call. You see: Tap Recent Calls. You see: Tap number you want to call, then tap Dial. You see: When call is connected, you see the following displayed: make a call using phone You can dial a handsfree call directly from your phone in the normal manner.

  • Page 42: Transfer A Call, Display In Call Screen

    • To unmute an active call, tap Unmute map view screen, or tap Unmute on In Call screen. transfer a call While on a call, you can transfer the call between your phone and TN30. • To transfer an active call from your TN30 to your phone, tap Talk on Phone on In Call screen.

  • Page 43: Safety Information

    OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. Approved Accessories Use of accessories not approved by Motorola, including but not limited to batteries, antennas, and convertible covers, may cause your mobile device to exceed RF energy exposure guidelines and may void your mobile device’s warranty. For a list of approved Motorola accessories, visit our Web site at: www.motorola.com...

  • Page 44

    Batteries & Chargers Your battery, charger, or mobile device may contain symbols, defined as follows: Symbol Definition Important safety information follows. 032374o Do not dispose of your battery or 032376o mobile device in a fire. Your battery or mobile device may 032375o require recycling in accordance with local laws.

  • Page 45: Driving Safety

    If you choose to use your mobile device while driving, remember the following tips: • Get to know your Motorola mobile device and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.

  • Page 46

    • Use your mobile device to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.* •...

  • Page 47: Industry Canada Notice, Fcc Notice

    FCC ID in the format FCC-ID:xxxxxx on the product label. Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.

  • Page 48: Warranty

    Canada What Does This Warranty Cover? Warranty Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, messaging devices, and consumer and professional two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products (“Accessories”) and...

  • Page 49

    Warranty Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.

  • Page 50: Other Information

    This warranty extends only to the first consumer purchaser, and is not transferable. What Will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts.

  • Page 51

    Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including...

  • Page 52: Registration, Export Law

    Motosupport/source/registration.asp Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage.

  • Page 53: Recycling Information

    Caring for the Environment by Recycling This symbol on a Motorola product means the product Recycling Information should not be disposed of with household waste. Disposal of your Mobile Device and Accessories Please do not dispose of mobile devices or electrical accessories (such as chargers, headsets, or batteries) with your household waste.

  • Page 54: Index

    15 to favorite location 16 to home location 16 to location on map 15 to recent location 16 detour 19 disconnect from your phone 35 end a call 41 GPS status information 28 home location 16, 20 index...

  • Page 55

    install new maps 29 keyboard 22 search and select item 22 select type 31 text entry 23 lane information icon 5 language setting 30 list of directions 19 main menu screen 12 make a call 37 dial from phone 40 dial number 38 redial number 39 index...

  • Page 56

    cancel 21 create 14 manage 18 save 22 route screen 4 route status bar 5 safety tips 44 save route 22 settings keyboard type 31 language 30 measurement units 31 time zone 30 voice prompts 32 setup 10 time zone setting 30 transfer call to/from phone 41 turn on &...

  • Page 57

    www.motorola.com...

This manual also for:

89292n, Motonav tn30

Comments to this Manuals

Symbols: 0
Latest comments: