5.1.8
The Numeric Keypad Does Not Work Properly
Are the NumLock LEDs in the remote terminal and VNC screen in the
same status?
If the NumLock LED status in the VNC menu window is not same as that in the
remote terminal unit, the Numeric Keypad does not work properly.
Click NumLock once out of the VNC screen to conform the setting.
5.1.9
The Mouse Does Not Work
Perform [PS/2 Reset] or [USB Replug].
If the USB keyboard/mouse is disabled (connecting PS/2 status), click the [PS/2
Reset] button in the VNC menu window to reset PS/2 emulation.
Refer to
2.5.3 Menu Window (page 34)
If the USB keyboard/mouse is enabled, click the [USB Menu] button in the VNC
menu window and display the USB Menu window. Click the [do] button in the
USB Replug and disconnect and reconnect the USB connection.
Refer to
2.5.9 USB Setting Window (page 47)
5.1 Troubleshooting
SERVIS IP-KVM
149
1p Converter
User's Guide
5