Access Sharing Policy - Fujitsu SERVIS IP-KVM User Manual

(2) SSH Tunnel Setting
If the VNC connection is transmitted via SSH tunnel, the combination of the
SSH user name and password are used for certification. Consequently, there is
no need to enter the password. Make sure not to use this function when the
SSH client machine is not safe and there is a possibility other users use the
SSH tunnel.
Select enabled/disabled the function from the following lists. The selected
setting is reflected immediately.

3.3.1.3 Access Sharing Policy

Specify the access setting when multiple remote users perform VNC connection
at the same time. Select enabled/disabled from the list as below and the setting
is reflected immediately.
Disabled – Use regular give/take method (default)
In case you do not have control, click-left on the VNS window display area
to obtain the control.
Enforce single – user access policy (visible screen)
When a user is connected to the VNC, other remote users are only allowed
to view the screen. Other users are not allowed to obtain the control.
Enforce single – user access policy (blank screen contents)
When a user is connected to the VNC, other remote users are not allowed
to connect.
Refer to 3.8 Concurrent Connection of Network Users (page 136)
In every setup, administrator can obtain the control.
3.3 VNC Operation Setting
SERVIS IP-KVM
1p Converter
User's Guide
3
79