Fujitsu SERVIS IP-KVM User Manual page 47

Operation Selecting Area (Left of the menu window)
System ID Displays the specified system information.
Refer to
Mouse Resyn Synchronises the remote terminal and host server cursor position. If
the USB absolute mouse is enabled, the button is displayed in gray.
Refer to
PS/2 Reset Reset the PS/2 emulation. Use this button in case the mouse pointer
or PS/2 keyboard is disabled.
USB Menu Display the USB menu window. If the device is not connected to the
host server by USB cable, the button is displayed in gray.
Refer to
Video Reset Update the host server display area.
Take Ctrl When multiple users connect to the same system and the other user
establishes the control authority, takes control authority from the user.
Only one user can operate by keyboard and mouse.
Refer to
Video Tune Displays the Video Tune window for fixing the video image.
It is used when video tuning is performed manually.
Refer to
VirtKeys Displays the virtual keyboard that provides special key
(Control-Alt-Delete, etc.) for the host server.
Refer to
Disk Ctrl Displays the disk operation window to emulate the USB virtual disks.
Refer to
Menu Bar Switches display/hide the menu bar at the top of the VNC window.
KVM Menu Displays the KVM menu window.
Refer to
Close Closes the menu window
Setting Display Area (Right of the menu window)
Host power: If the host server is on: On is displayed,
if the host server is off: Off is displayed.
Video mode: Displays the graphic mode setting for host server. (Example: 800 x
600 @ 60Hz)
If the host server is off: No power is displayed.
KB mouse I/F: Displays the host server keyboard and mouse are connected whether
PS/2 or USB.
LED State: Displays keyboard LED is on/off. (If the LED is off, the menu is
displayed in gray).
Indicates each LED status, [Num] for NumLock, [Caps] for CapsLock,
and [Scroll] for ScrollLock.
Power In: Displays the connecting status of the product's power port 1 and 2.
If the power port is connected, "plugged" is displayed and "unplugged"
for unconnected status.
My IP: Displays the IP address.
Time: Displays the specified current date and time.
Tx rate/delay: Displays current network transmission rate and delay time.
B/W: Specify the bandwidth control. Specify Fast: for less than 12Mbps, Avg
for less than 4Mbps, and Min for less than 700kbps.
Select "Auto" for this setting, appropriate setting is automatically
selected.
Thumbnails: Resizes the screen image from half size down to one sixteenth by
clicking [1/2]. [1/4], [1/8] and [1/16]. Restore the image to the original
size by clicking the screen.
2.5 Host Server Operation from Java VNC
3.4.1 Identification (page 114)
3.3.3.4 Disable USB Absolute Mouse Support (page 88)
2.5.9 USB Setting Window (page 47)
3.8 Concurrent Connection of Network Users (page 136)
2.5.6 Video Tune Window (page 41)
2.5.5 Virtual Key Window (page 38)
2.5.7 Disk Operation Window (page 45)
2.5.10 KVM Menu Window (page 49)
SERVIS IP-KVM
35
1p Converter
User's Guide
2