Virtual Cd-Rom Drive - Fujitsu SERVIS IP-KVM User Manual

3.3 VNC Operation Setting

3.3.4.5 Virtual CD-ROM Drive

By specifying the URL for the ISO files in the file server, the product can be
emulated to the host server as a virtual CD-ROM drive.
ISO files are emulated in the accessible file server of this product.
Store the ISO files in the online file server.
The virtual CD-ROM drive setting method is described below. (The following method
is for the Windows OS host server.)
3
Setting Procedure
1. Select [Keyboard, Mouse, Storage] on the [Keyboard/Mouse/KVM Setup] page
for USB device setting.
If the host server is rebooted, USB virtual disk function will be "Disable"
automatically.
When you use USB virtual disk function again after the host server starts,
please set USB Device setup as [Keyboard, Mouse, Storage].
In the case where it sets up on the Web page:
In the case where it sets up on the VNC window:
SERVIS IP-KVM
110
1p Converter
User's Guide
Refer to 3.3.3.5 USB Device (page 89)
Refer to 3.3.3.5 USB Device (page 89)
Refer to 2.5.9 USB Setting Window (page 47)