Fujitsu SERVIS IP-KVM User Manual page 17

(7) Ethernet Port
Ethernet connector which is compliant with 10BASE-T/100BASE-TX.
Both UTP and STP cables are available.
Connector type is RJ45 modular jack.
Refer to 4.2 RJ45 Connector Signal Assign (page 141)
(8) Console Port
For RS232 Connection.
Connects to this product using this Console port and set the network at initial
installation.
Connector type is RJ45 modular jack.
Refer to 1.5.4 Serial Console Connection (page 12)
(9) Power Adapter Connector
Connects the power adapter (DC5V input).
This product can connect up to 2 power adapters, redundant configuration is
supported.
(10) Ethernet Act LED
Blinks green when a data packet is sent or received by VNC connection.
(11) Ethernet Link LED
Lights up green when the Ethernet port is linked up.
(12) Power LED 2
Lights up green when the adapter is connected to power connecter 2 and power
is supplied.
(13) Power LED 1
Lights up green when the adapter is connected to power connector 1 and power
is supplied.
1.3 Parts and Functions
SERVIS IP-KVM
5
1p Converter
User's Guide
1