Table of Contents
Advertisement
2.5 Host Server Operation from Java VNC
2.5.2
VNC Menu
The following menu bar is displayed at the top of the VNC window.
Menu bar buttons provide various functions.
2
VNC Menu Bar
SERVIS IP-KVM
32
1p Converter
User's Guide
Shows the LED status from the left Num Lock, Caps Lock and Scroll
Lock. If the LED off, it is displayed in gray.
Shows current transmission capacity (baud rate) / delay time.
Display the menu window.
Refer to
2.5.3 Menu Window (page 34)
Correct the difference between host server side and remote terminal
side mouse pointers position. If the USB absolute mouse enabled,
the button cannot be selected.
Refer to
3.3.3.4 Disable USB Absolute Mouse Support (page 88)
Input [Crtl] - [Alt] - [Delete] key to the host server.
Ctl-Alt-Del button is displayed if you select "Generic or US/English"
or
or "Japanese (106/109 keys)" in [Keyboard Mapping (for
localization)].
Strg-Alt-Entf button is displayed if you select "German (QWERTZ
layout)" in [Keyboard Mapping (for localization)].
Refer to
3.3.3.2 Keyboard Mapping (for localization) (page86)
Display the virtual key window.
Refer to
2.5.5 Virtual Key Window (page 38)
Reset the PS/2 emulation. Use this button in case the mouse pointer
or PS/2 keyboard is disabled. If the USB keyboard/mouse enabled,
the button cannot be selected.
Display the USB menu window. If the device is not connecting to the
host server by USB cable, the button cannot be selected.
Refer to
2.5.9 USB Setting Window (page 47)
If using with a KVM switch, output the specified hot keys to the KVM
switch. It is not displayed in default. The button is displayed if you
select other than "Disable" in [Hot Key configuration of FCL KVM
Switch].
( Refer to REF _Ref118884558 ¥r ¥
3.3.3.1 REF _Ref118884562 ¥
Hot Key
configuration of FCL KVM Switch (page 85)
If using with a KVM switch, reset the KVM switch. It is not displayed
in default. The button is displayed if you select other than "Disable" in
[Hot Key for FCL KVM Switch setting].
Refer to
3.3.3.1 Hot Key configuration of FCL KVM Switch (page
85)
Update the host server display area.
Indicates the mouse pointer's automatic correction function. Click
this indication to enable/disable the function. If the function disabled,
the indicator is displayed in gray.
h
¥* MERGEFORMAT
h
¥* MERGEFORMAT
Advertisement
Table of Contents
Troubleshooting
