Usb Setting Window - Fujitsu SERVIS IP-KVM User Manual

2.5.9

USB Setting Window

Click [USB] on the VNC menu bar to display the USB setting window.
This window sets USB keyboards, mouse and storages.
USB Setting Window
Select one USB device setting from the following three.
The selected button is displayed.
Keyboard, Mouse,
Storage :
Keyboard, Mouse :
Keyboard :
ABS
REL
USB Replug :
2.5 Host Server Operation from Java VNC
Click [Set] button to enable USB keyboard, USB mouse and USB
virtual disk.
Click [Set] button to enable USB keyboard and USB mouse.
(Default setting)
USB virtual disk is disabled.
Click [Set] button to enable only USB keyboard.
USB mouse and virtual disk are disabled.
It shows the absolute mouse is enabled.
If the relative-value mouse is enabled, the button is displayed in
gray.
It shows the relative-value mouse is enabled. (Default setting)
If the absolute-value mouse is enabled, the button is displayed in
gray.
Click [do] button to simulate connect and disconnect of the USB
connector.
This button fixes error in case an access error occurred in the host
server.
Close the USB Menu window.
SERVIS IP-KVM
47
1p Converter
User's Guide
2