Fujitsu SERVIS IP-KVM User Manual page 7

Connection to Servers and Countermeasures against Static
Electricity
When attaching/removing connectors to connect the server port of this product to
a host server, ensure that host server is turned off. In addition, be sure to
discharge static electricity before connecting the cables.
Twisted pair cables (e.g. LAN cables) may be charged with static electricity
depending on your operating environment. Connecting twisted pair cables
charged with static electricity to devices including this product could cause a
malfunction or failure of the devices or their LAN ports.
Use a static eliminator or any other tool immediately before connecting, and
discharge static electricity in twisted pair cables to ground wires.
Note that if the cables remain unconnected for a long time after discharging static
electricity, they may be charged with static electricity again.
High Safety Measures
This Product is designed, developed and manufactured as contemplated for
general use, including without limitation, general office use, personal use,
household use, and ordinary industrial use, but is not designed, developed and
manufactured as contemplated for use accompanying fatal risks or dangers that,
unless extremely high safety is secured, could lead directly to death, personal
injury, severe physical damage or other loss (hereinafter "High Safety Required
Use"), including without limitation, nuclear reaction control in nuclear facility,
aircraft flight control, air traffic control, mass transport control, medical life support
system, missile launch control in weapon system.
You shall not use this Product without securing the sufficient safety required for
the High Safety Required Use. Neither Fujitsu Component Limited nor its affiliates
shall be responsible for any damages that occur to the user of this product or a
third party due to the use of this product in a situation that requires advanced
safety measures.
SERVIS IP-KVM
vii
1p Converter
User's Guide