Table of Contents
Advertisement
Temperature Request (If ACCTemp101 installed)
The user can request the temperature in the vehicle if a Temperature Sensor Module (ACC-Temp-
101) is installed:
•
Through the remote's advanced function menu (page-6), select L-01.
•
Immediately press the
LCD screen.
Temporary Chirp Delete
To temporarily disable the chirp confirmations of the siren upon arming and disarming (e.g. in a
quiet neighbourhood):
• Press the
• Immediately, press the
Relock
If you unlock the doors with the remote transmitter, but do not open any door, hood, trunk or turn
ignition ON within 30 seconds, the system will automatically relock and arm.
Note: When the system is in active arming mode and the relock mode is enabled, the doors will
relock but the system will not rearm.
Missing a Start or a Stop Confirmation
If you have not received a Start or the Stop confirmation after pressing the
button within range of the remote starter's signal will refresh the display and will confirm if the
vehicle was started or stopped.
If no Start Confirmation Was Received:
•
Press the
If no Stop Confirmation Was Received:
•
Press the
Advanced Features: Installationprogrammable Options
The remote starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution: The programming of your system should be left to a professional. Changing any one of
the settings may affect the operation of your remote starter.
P.18
button and hold it until the temperature is displayed on the
button. The remote will beep once.
or
button:
The remote's
icon will start flashing
The
icon and runtime time countdown will be displayed.
button:
The
will be displayed
The remote's
icon and the runtime countdown will disappear.
button to arm or disarm system without any chirp.
button, pressing the
User Guide
Advertisement
Table of Contents
