Directed Electronics PS-7870TWE-FM User Manual page 15

Smart start two-way lcd automatic/manual transmission remote starter with full alarm system
Hide thumbs Also See for PS-7870TWE-FM:
Table of Contents

Advertisement

ii)
The LED on the antenna will stay ON indicating that the vehicle has successfully entered
Combo Valet.
Using the PUSH-BUTTON SWITCH (Valet Switch Mode):
i)
Insert the ignition key into the ignition switch and turn the key to the ON position
ii)
Within 5 seconds, press the push-button switch until the parking lights flash 3 times.
iii)
Release the push-button and turn the ignition to the OFF position.
iv)
The LED on the antenna will stay ON indicating that the vehicle has successfully entered
Combo Valet.
v)
The
icon will appear on the LCD remote.
Using the KEY (Ignition Valet Mode):
Insert the ignition key into the ignition switch. Within 10 sec., cycle the ignition key to the
i)
IGNITION/RUN and OFF positions 5 times until the parking lights flash twice.
Turn the ignition OFF.
ii)
The LED on the antenna will switch OFF indicating that the vehicle is now out of Combo
iii)
Valet.
The
icon will disappear from the LCD remote.
iv)
Using the TRANSMITTER (Remote Valet Mode):
Press the
i)
display.
The LED on the antenna will switch OFF indicating that the vehicle is now out of Combo
ii)
Valet.
Using the PUSH-BUTTON SWITCH (Valet Switch Mode):
Insert the ignition key into the ignition switch and turn the key to the ON position.
i)
Press the push-button switch until the Parking lights flash twice.
ii)
Release the push-button and turn the ignition to the OFF position.
iii)
The LED on the antenna will switch OFF indicating that the vehicle is now out of Combo
iv)
Valet.
The
icon will disappear from the LCD remote.
v)
To put the system into Combo Valet, Valet Start or Valet Alarm
Through Advanced Options, first press
i)
Choose VALET and press
ii)
Press
or
iii)
(1) CMVLT = Combo Valet (Starter and Alarm are disabled)
(2) VLTST = Valet Start (Only the starter is disabled)
(3) VLTAM = Valet Alarm (Only the alarm is disabled)
Once the selection is done, press
iv)
Choose ON, then press and hold
v)
(1) The
(2) The
(3) The
User Guide
To take the system out of Combo Valet
Shortcut version:
and
buttons simultaneously until the
Long menu version:
.
to toggle between three kinds of Valet Modes:
icon appears to confirm Combo Valet activation.
icon appears to confirm Valet Start activation.
icon appears to confirm Valet Alarm activation.
to select MENU (page-6)
until;
icon disappears from the LCD
P.15

Advertisement

Table of Contents
loading

Table of Contents