Directed Electronics PS-7870TWE-FM User Manual page 9

Time start function:
This feature is used to remote start the car at a pre-programmed time. Once the pre-
programmed time is reached, the remote will send a start command to the car
module.
Through Advanced Options, first press
TSTAR
(5)
The TSTART function can only be carried out once per remote start.
Note:
Secure function:
This feature is used to lock the keypad of the transmitter to avoid accidental button
press. When the keypad is locked and a button is pressed, the LCD will display
"PRESF" for 1 second and goes back to the clock.
The transmitter keypad can also be locked as follows:
SECUR
(6)
Backlight color
The backlight can be set to 8 different colors.
COLOR
Through Advanced Options, first press
(7)
Confirmation Mode Menu:
•
CONFM
(8)
•
Clock:
The Clock menu is used to set the current time on your remote control.
CLOCK
Through Advanced Options, first press
(9)
User Guide
c. Once the selection is done, press
d. Choose ON/OFF, then press and hold
i. The
Valet activation/deactivation.
ii. The
activation/deactivation.
iii. The
activation/deactivation.
a. Choose TSTART and press
b. Set the time at which you want to remote start the vehicle. First set
the hour, and press
Choose ON and wait. A flashing "T" and
c.
screen to confirm activation.
a. Press to select MENU.
b. Within 3 seconds, press
c. The LCD will display "SECUR" to confirm locking of the keypad.
Press
•
a. Choose COLOR and press
b. Choose the desired color by pressing
BZVIB BUZ: The remote will beep to confirm various commands.
VIB: The remote will vibrate to confirm various commands.
Note: The
remote is set to vibration mode.
BLITE
alarm is triggered.
OFF: The LCD won't flash if the alarm is triggered.
a. Choose CLOCK and press
b. Set the time at which you want to set the clock. First set the hour,
icon appears/disappears to confirm Combo
icon appears/disappears to confirm Valet start
icon appears/disappears to confirm Valet Alarm
to select MENU, then:
.
. Then set the minutes and press
.
for about 1sec to unlock the transmitter's keypad.
,
to select MENU, then:
.
icon will appear on the screen to confirm
ON: The LCD screen will flash when the
to select MENU, then:
.
until;
.
will appear on the
or
P.9