Using The Paging Feature; Paging Another Phone; Paging A Group Of Phones - Cisco Small Business SPA525G2 User Manual

Using Advanced Phone Features

Using the Paging Feature

Using the Paging Feature
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
To switch the audio destination between the speaker, headset, and handset, press
the Up Arrow or Down Arrow key. The icon on the left above the song length
display shows the audio destination of speaker, handset, or headset.
Your IP phone can automatically answer pages from other Cisco SPA phones in
the phone system. When your phone is paged, the phone emits a series of beeps,
and two-way audio is established between your phone and the phone that called
you. You do not have to accept the page.
This feature must be configured by your phone administrator.

Paging Another Phone

To page another phone, dial *96 plus the extension of the phone you are paging. If
the phone you are paging is not set up to auto answer pages, the call rings as
would a normal voice call.

Paging a Group of Phones

A phone can be configured to be part of a paging group. Each paging group has a
number associated with it. Your administrator must give you the number of the
groups that are configured. To page this group just dial the number of the paging
group.
4
70