Using A Headset With Your Ip Phone; Switching Between The Handset/Headset/Speakerphone During A Call - Cisco Small Business SPA525G2 User Manual

Getting Started
Using Phone Hardware and Accessories
STEP 9
STEP 10
STEP 11
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
Scroll to PIN and enter the PIN for your Bluetooth headset.
Scroll to Connect Automatically and press the Right Arrow key to turn to On.
Press Connect. The profile screen displays and a check mark appears next to the
headset if the connection was successful.

Using a Headset with Your IP Phone

Steps to use your headset with the IP phone might vary. Consult the user
documentation for your headset for more information.
• To use a wired headset, press Headset and dial the number to place a call,
or press the headset button to answer a ringing call.
• To use a non-Bluetooth wireless headset (such as Jabra or Plantronics), lift
the receiver off hook before speaking or listening through the headset.
• To use a Bluetooth headset, make sure your headset is powered on. Press
Headset on your phone (or, if supported, press Answer on your Bluetooth
headset twice) and dial the number to place a call. Press Answer on your
Bluetooth headset to answer a ringing call. See the user documentation for
your Bluetooth headset for more information.
Switching Between the Handset/Headset/Speakerphone
During a Call
Any of these audio devices can be used during a call. Only one device can be
used at a time. The handset can be on the hook when using the speaker or
headset function.
To switch from the handset to the speaker, press Speaker and place the handset
back on the hook.
To switch from the speakerphone to a headset, press Headset.
To switch from the speaker to the handset, pick up the handset.
To switch from the headset to the speakerphone, press Speaker.
1
20