Special Fax Modes - Sharp MX-2301N Quick Start Manual

SPECIAL FAX MODES

The special modes can be used for a variety of special-purpose fax transmission jobs.
The following pages show the types of fax transmissions that can be performed. (The procedures for using each
special mode are not explained.)
Each special mode has its own settings and steps, however, the basic procedure is the same for all modes. The
basic procedure for selecting a special mode is explained on the next page using "Erase" as an example.
For the procedures for using the special modes, see "SPECIAL MODES" in "4. FACSIMILE" in the
Operation Guide.
Special modes
Ready to send.
Fax Scan Send
Mode Switch
Auto
A4
Job Detail
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
1st screen
Fax/Special Modes
Program Erase
2in1
Timer
3rd screen
Fax/Special Modes
Verif. Transaction
Stamp Report
Own Name
Memory Box
Select
When a special mode key encircled by
When any other special mode key is touched, a screen appears to let you select settings for that mode.
The keys that appear vary by country and region and the peripheral devices that are installed.
Speaker
Resend
Address Book
Sub Address
Special Modes
File
Quick File
OK
1/3
Dual Page
Scan
Card Shot
OK
3/3
Polling
is touched, the key is highlighted and the setting is completed.
To use a special mode, open the special modes
menu and touch the key of mode that you wish to
use. The menu consists of three screens. Use the
keys to switch between the screens.
Touch the [Special Modes] key in the base screen to
open the special modes menu.
2nd screen
Fax/Special Modes
Job
Mixed Size
Build Original
Original
File
Count
OK
2/3
Slow Scan
Mode
Quick File
69