Base Screen Of Fax Mode - Sharp MX-2301N Quick Start Manual

BASE SCREEN OF FAX MODE

Press the [IMAGE SEND] key in the Operation panel to open the base screen of fax mode. If the fax screen does
not appear, touch the [Mode Switch] key.
Select fax settings in the base screen.
(1)
(2)
(3)
(4)
(5)
(1) [Mode Switch] key
Use this key to change the mode of the image send
function.
(2) [Job Detail Settings] key
Touch this key to select image settings (exposure,
resolution, original size, and two-sided original) and
special mode settings.
(3) [Memory TX] key
This key is highlighted when a normal transmission
(memory transmission mode) is performed.
(4) [Direct TX] key
Touch this key to send a fax by direct transmission.
(5) This shows the currently selected fax reception
mode and the amount of free memory remaining.
(6) key
Touch this key to retrieve a destination using a search
number.*
* 3-digit number assigned to a destination when it is stored.
(7) [Speaker] key / [Pause] key / [Space] key
Touch this key to dial using the speaker.
When entering a fax number to be dialled, the key
changes to the [Pause] key. When entering a
sub-address, the key changes to the [Space] key.
56
Ready to send.
Fax
Mode Switch
Job Detail
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
(7) (8)
(6)
Speaker Resend
Address Book
Sub Address
Special Modes
File
Quick File
(12) (13)
(8) [Resend] key / [Next Address] key
The destinations of the most recent eight
transmissions by Scan to E-mail, fax and/or Internet
fax (including Direct SMTP address) are stored. To
select one of these destinations, touch the desired
destination. After a destination is selected, this key
changes to the [Next Address] key.
(9) [Address Book] key
Touch this key to dial using a one-touch key or group
key. When the key is touched, the address book
screen appears.
(10) [Sub Address] key
Touch this key to enter a sub-address and passcode
for F-code transmission.
(11) Customized keys
The keys that appear here can be changed to show
settings or functions that you prefer.
(12) key
When "Hold Setting for Received Data Print" or
"Received Data Image Check Setting" is enabled in
the system settings (administrator), this will appear
when a fax is received.
(13) key
This key appears when a special mode or 2-sided
scanning is selected. Touch the key to display the
selected special modes.
(9)
(10)
(11)