Settings Required To Use The Network Delivery Scanner - Ricoh AFICIO MP C2500 Settings Manual

Settings Required to Use the Network Delivery Scanner

This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with ether-
net cable.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network Ethernet Speed
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL/TLS Communication
Interface Settings/Network Host Name
File Transfer
File Transfer
File Transfer
File Transfer
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
❒ If [Delivery Option] is set to [On], check that IPv4 Address is set.
Reference
p.56 "Interface Settings"
p.66 "File Transfer"
Downloaded From ManualsPrinter.com Manuals
User Tool
Delivery Option
Fax RX File Transmission
Scanner Resend Interval Time
Number of Scanner Resends
Network Settings
Setting Requirements
Neccessary
As required
As required
As required
As required
As required
Neccessary
As required
Neccessary
As required
As required
As required
As required
As required
As required
As required
1
27