User Instructions; Operating Instructions - Cannon FITZP User Instructions

User instructions

Operating instructions

6
1. Plug the power cord into the wall socket and turn on the power
to the heater, see figure 1. Use of an extension cord is not
recommended
1
2. For control lay-out refer to figure 2
2
3. To turn heater on press switch to POWER ON position. There
is a 5 second delay before the burner ignites. At this setting the
burner is on LOW and the fan speed is on LOW. Refer
figure 3.
The burner will ignite on both HIGH and LOW settings.
3
4. To turn burner to HIGH setting, press switch for HIGH setting.
Refer figure 4.
4