Cannon FITZFS-SDSEB-NG User Instructions page 7

5. To increase the fan speed to MED, press switch for MED setting. Refer
figure 5.
5
6. To increase the fan speed to HIGH, press switch for HIGH setting.
Refer figure 6.
6
7. To turn the burner to LOW setting, press switch for LOW setting. Refer
figure 7.
On low burner setting it is more efficient to operate the fan speed on
LOW.
7
8. If the burner fails to ignite, wait 20 seconds and repeat the ignition
procedure. See below.
To turn burner OFF
9. In case of a power failure return the switches to the OFF setting (refer
figure 2). When power returns, wait 20 seconds and start re-ignition
as per point 3.
To turn burner ON
7