Cannon FITZFS-SDSEB-NG User Instructions page 11

8. Remove the pedestal front by unscrewing two screws either side. Re-
fer figure 11.
11
9. Remove the heater front securing screws, one either side. Refer figure
12.
10.Remove the heater front by pulling it towards you gently to partly
disengage it from the body of the heater then gently lift it up vertically
to completely disengage it. Refer figure 13.
13
11.Remove the inner glass. Slacken off screws in top clamp and remove
side clamps. Refer figure 14.
14
12
v
11