Displaying Cd Titles; Loading A Cd; Selecting A Track - Clarion CMD6 Owner's Manual

CD/MP3/WMA/AAC Operations
2. Press the [Q] button. Remove the disc after
it is ejected.
3. Close the front panel.
Press the center of the DCP to close.
Notes:
• Always close the front panel once you take out
the disc.
• If a CD (12 cm) is left in the ejected position for
15 seconds, the CD is automatically reloaded
(Auto reload).
• If you force a CD into before auto reloading, this
can damage the CD.
CAUTION
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.
Listening to a disc already loaded in
the unit
Press the [DISC] button to select the CD/MP3/
WMA/AAC mode.
When the unit enters the CD/MP3/WMA/AAC
mode, play starts automatically.
If there is no disc loaded, the indication "NO
DISC" appears in the title display.

Loading a CD

1. Press the [OPEN] button to access the CD
SLOT behind the front panel.
2. Insert a CD into the center of the CD SLOT
with the labeled side facing up. "LOADING"
appears in the display, the CD enters into the
slot, and the play starts.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
• Discs not bearing the
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
3. Close the front panel.
or mark and
Press the center of the DCP to close.
CAUTION
Be careful not to catch your hand or fingers
while closing the front panel.
Notes:
If the front panel does not open fully, gently open
with your hand.
After loading a CD, always close the front panel.
Pausing play
1. Press and hold the [
play.
"PAUSE" appears in the display.
2. To resume CD play, press and hold the
[ ] button again.

Displaying CD titles

This unit can display title data for CD-text/MP3/
WMA/AAC disc with this unit.
1. Each time you press the [DISPLAY] button
to change the title display.
● CD-TEXT disc
Track ➜ Disc/Artist
● MP3/WMA/AAC disc
Track ➜ Folder ➜ Title/Album ➜ Artist
Notes:
• If the CD playing is not a CD-text CD "NO TITLE"
appears in the display.
• If MP3/WMA/AAC disc is not input TAG, "NO
TITLE" appears in the display.
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2.
• In the case of album Tags for WMA, the
information written into the extension header is
displayed.
• Only ASCII characters can be displayed in Tags.

Selecting a track

● Track-up
1. Press the [V] button to move ahead to the
beginning of the next track.
2. Each time you press the [V] button, the track
advances ahead to the beginning of the next
track.
● Track-down
1. Press the [X] button to move back to the
beginning of the current track.
2. Press the [X] button twice to move back to
the beginning of the previous track.
] button to pause
21
CMD6