Cd Changer Mode; Inserting The Battery - Clarion CMD6 Owner's Manual

Wireless Remote Control Unit Operations
● CD changer mode
[BND] button
• Press and hold to switch to next disc in
ascending order.
• Press to play the first track of the current disc.
[x], [v] buttons
• Press to move the tracks up and down.
• Press and hold the button (1 sec.) to perform
fast-forward/fast-backward.
[ ] button
• Switches between playback and pause.
[SCN] button
• Press to perform scan play.
• Press and hold the button (1 sec.) to perform
disc scan play.
[RPT] button
• Press to perform repeat play.
• Press and hold the button (1 sec.) to perform
disc repeat play.

Inserting the Battery

1 Turn over the remote control unit and slide
the cover in the direction indicated by the
arrow in the illustration.
2 Insert the battery (CR2025) into the insertion
guides, with the printed side (+) facing
upwards.
3 Press the battery in the direction indicated by
the arrow so that it slides into the
compartment.
4 Replace the cover and slide in until it clicks
into place.
Insertion guide
12
CMD6
[RDM] button
• Press to perform random play.
• Press and hold the button (1 sec.) to perform
disc random play.
● iPod mode
[x], [v] buttons
• Press to move the tracks up and down.
• Press and hold the button (1 sec.) to perform
fast-forward/fast-reverse.
[ ] button
• Switches between playback and pause.
[RPT] button
• Press to perform repeat play.
[RDM] button
• Press to perform random play.
• Press and hold the button (1 sec.) to perform
all random play.
Notes:
Misuse may result in rupture of the battery,
producing leakage of fluid and resulting in
personal injury or damage to surrounding
materials. Always follow these safety precautions:
• Use only the designated battery.
• When replacing the battery, insert properly, with
+/– polarities oriented correctly.
• Do not subject battery to heat, or dispose of in
fire or water. Do not attempt to disassemble the
battery.
• Dispose of used batteries properly.