Oce VarioPrint 6000 series User Manual page 57

Use the red handle to push the OPC unit inwards as far as possible.
2.
[74]
[74] Move the OPC unit in
Use the D-wrench to turn K5 clockwise into the locked position.
3.
Use the D-wrench to turn K4 counter-clockwise into the locked position.
4.
Use the D-wrench to turn K3 counter-clockwise into the locked position.
5.
Use the D-wrench to turn K2 counter-clockwise into the locked position.
6.
Use the D-wrench to turn K1 counter-clockwise into the locked position.
7.
[75]
[75] Lock the OPC unit
K5
K4
K3
K1
K2
Clean the OPC belt (right)
57