Oce VarioPrint 6000 series User Manual page 41

Lower the front of the unit and remove the unit.
4.
Put the unit on a heat-resistant base. Make sure that the left-hand side is on
5.
top.
Disassemble and assemble the preheat unit
Caution: Hot area. Use heat-resistant gloves.
Press both red leaf springs at the preheat unit plate outwards and pull out the
1.
plate.
[45]
[45] Disassemble the preheat unit
Turn both belts to remove the sheets inside the preheat unit.
2.
[46]
[46] Turn the belts
Put the preheat unit plate back.
3.
Remove sheets from the process modules
41