Oce VarioPrint 6000 series User Manual page 52

Clean the OPC belt (left)
Use the red handle to push the OPC unit inwards as far as possible.
2.
[66]
[66] Move the OPC unit in
Use the D-wrench to turn L5 counter-clockwise into the locked position.
3.
Use the D-wrench to turn L4 clockwise into the locked position.
4.
Use the D-wrench to turn L3 clockwise into the locked position.
5.
Use the D-wrench to turn L2 clockwise into the locked position.
6.
Use the D-wrench to turn L1 clockwise into the locked position.
7.
[67]
[67] Lock the OPC unit
52 Chapter 3 Maintenance tasks - Level 2
L5
L4
L3
L1
L2