Oce VarioPrint 6000 series User Manual page 45

Use the red handle to lift the left-hand clean unit to the upper position (2).
2.
[54]
[54] Lift the clean units
When you press 'Next' on the operator panel, a dialog box appears.
Attention: A sheet on one of the spiral cleaners or on both spiral cleaners
will seriously damage the machine.
Check whether there is a sheet on one of the spiral cleaners.
3.
If not, go to step 4. If there is, go to step 5.
Press 'No' if the spiral cleaners do not have sheets on them.
4.
Press 'Y es' if there is a sheet on one of the spiral cleaners. Now you must follow
5.
the procedures for removing, reconditioning and installating of the sheet
cleaners and spiral cleaners *** 'Replace the cleaners' on page 16 ***.
Lower the clean units
Attention: Make sure that the clean units are in the lowest position.
Lift the right-hand clean unit and push the red handle to unlock the locking
1.
mechanism (1).
Lower the right-hand clean unit into the locked position (2).
2.
Lift the left-hand clean unit and push the red handle to unlock the locking
3.
mechanism (3).
2 1
Remove sheets from the process modules
45