Ip Specifications; Installation Environment; System Requirements - Honeywell HEIPTZ-2201W-IR User Manual

Product Introduction

IP Specifications

Installation Environment

System Requirements

4

Built-in Web Server fully supports Internet Explorer for browsing, configuration and
upgrade.

Support both CBR and VBR

UPNP function.

Support DDNS.

Support PPPOE protocol.

Support snapshot, remote recording and playback.

Video compression format: H.264and MJPEG.

Motion detection.

Linkage alarm output, linkage snapshot, linkage recording based on alarm events..

Sent images via FTP or Email as alarm event.
Do not expose the PTZ to moisture or high temperature. Ensure the installation environment
is well ventilated and devoid of violent vibration. Ensure the PTZ is placed far away from any
heat object.
Atmospheric pressure:
Ambient temperature
Relative humidity

Ensure LAN or Internet service is available; every PC is well connected to Ethernet (via
NIC or network cable); TCP/IP network software Internet Explorer (contained in
Windows /NT/2000/XP), Internet Explorer 8.0 or later is recommended.

PC requirements: CPU: PⅢ or later; Memory: 512M or above (DirectX8.1 or later).

Monitor: 17-inch screen; 1920×1080 resolution is recommended.

Operating system: Windows NT, Windows2000, Windows XP and higher editions.
when the device is
in below - 10 ℃
temperature
suggested
equipment do
power cycle again
80 to 110KPa
-40℃ to +55℃
95% RH (+25℃)