Cisco 2500 Series User Manual page 54

Applications Windows
Table 3-17
Table 3-17
Option
Event Schedule
Event Schedule List
New Schedule
Effective Time Frame
Start Time
End Time
Add button
Clear button
Trigger Event
Enable
Triggered by
Cisco Video Surveillance 2500 Series IP Camera User Guide
3-32
describes the options in the Event window.
Event Window Options
Description
Displays the schedules that you configure in the New Schedule area.
To remove an event from the list, highlight it and click Delete.
Choose a day or range of days. If an event occurs during this time, and
between the times that you configure in the following two fields, the
IP camera takes the configured actions (sends an e-mail message, sends a
relay through its output ports). If an event occurs outside of this time, the
IP camera does not take any actions.
Enter the start time for the effective time frame.
Enter the end time for the effective time frame.
Adds the schedule that is defined in the Effective Time Frame, Start Time,
and End Time fields.
You can add up to 10 schedules.
Clears the values that are in the Effective Time Frame, Start Time, and End
Time fields.
Check this check box to cause the IP camera to take configured actions when
an event triggers. You configure these actions in the Actions field.
Choose the desired options to designate the events that trigger actions:
Input 1—Event is triggered when input port 1 on the IP camera changes
•
state as configured by the Trigger Events When option in the Alarm I/O
Ports window.
Input 2—Event is triggered when input port 2 on the IP camera changes
•
state as configured by the Trigger Events When option in the Alarm I/O
Ports window.
Motion Detection—Event is triggered when the camera detects motion,
•
as described in the
Chapter 3 Configuring and Managing the IP Camera
"Motion Detection Window" section on page 3-30.
OL-19273-02