Administration Windows - Cisco 2500 Series User Manual

Chapter 3 Configuring and Managing the IP Camera
Table 3-6
Option
Enable EAPOL
EAP-TLS Options
Note
User ID
Root Certificate
Validate Root
Certificate
User Certificate
Password
EAP-FAST Options
Note
Allow Automatic PAC
Provisioning
User ID
Password
Anonymous ID
PAC File

Administration Windows

The Administration windows let you configure IP camera users, reset or restart the IP camera, and
upgrade firmware on the IP camera.
The following sections describe the Setup windows in detail:
•
•
•
OL-19273-02
IP Filter Window Options
Description
Check this check box to enable EAPOL on the IP camera.
These options appear if you check the Enable EAPOL check box and then choose EAP-TLS
from the Protocol Type drop-down list.
User identifier that is used to log in to the RADIUS server.
Path and folder on this PC or location of a Windows network shared folder
where the root certificate file is stored. You can click Browse to find this
location. After you enter this information, click Upload to upload the
certificate from the local PC to the IP camera.
Check this check box if you want the identity of the RADIUS server to be
validated.
Path and folder on this PC where the user certificate file is stored. You can
click Browse to find this location. After you enter this information, click
Upload to upload the certificate from the local PC to the IP camera.
IP camera client log in password for the RADIUS server.
These options appear if you check the Enable EAPOL check box and then choose EAP-FAST
from the Protocol Type drop-down list.
Check this check box if you want to allow authentication servers to establish
a secure connection with the IP camera so that they can provide the IP
camera with new Protected Access Credentials (PACs).
User identifier that is used to log in to the RADIUS server.
IP camera client log in password for the RADIUS server.
Unsigned public identifier to be used instead of a user name for logging in
to the RADIUS server.
Path and folder on this PC where the Protected Access Credential (PAC) file
is stored. You can click Browse to find this location. After you enter this
information, click Upload to upload the certificate from the local PC to the
IP camera.
Users Window, page 3-16.
Maintenance Window, page 3-17
Firmware Window, page 3-19.
Cisco Video Surveillance 2500 Series IP Camera User Guide
Administration Windows
3-15