Local Log Window - Cisco 7000 Series Configuration Manual

Local Log Window

Local Log Window
The Local Log window lets you view the log file that is stored on the IP camera.
To display the Local Log window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Log to expand the menu.
Step 2
From the Log menu, click Local Log.
Step 3
The Local Log window appears. If you change any options in this window, you must click the Save
Settings button to save the changes. If you do not click this button, changes are not retained when you
exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.
Table 7-2
Table 7-2
Option
Log List Area
Rows per page
Filter
Since
Go button
Severity
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4
7-4
describes the options in the Local Log window.
Local Log Window Options
Description
Choose the number of log entry rows to display per page and click the Go
button to the right of this option to update the display.
Choose the type of log message to include in the display.
To include messages of every severity, choose All.
Choose the time period for which you want to view log messages.
Update the log display based on the values in the Filter and Since fields.
An icon in this column indicates the severity of the corresponding log
message:
—Emergency message
—Alert message
—Critical message
—Error message
—Warning message
—Notice message
—Informational message
—Debug message
To display log messages in order of severity with the least severity first, click
the Severity column heading. Click the heading again to reverse the display
order.
Chapter 7 Log Configuration
OL-28694-01