Snmp Window - Cisco 2500 Series User Manual

Applications Windows
Table 3-17
Option
Pre-Capture Length
Post-Capture Length

SNMP Window

The SNMP window allows you to configure Simple Network Management Protocol (SNMP) settings for
the IP camera. These settings can help you manage complex networks by sending messages to different
devices on the network.
To display the SNMP window, access the configuration windows as described in the
Camera Windows" section on page
If you change any options in the SNMP window, you must click Save to save the changes. To discard the
changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may
need to scroll down to see them.
Table 3-18
Table 3-18
Option
SNMP Enable
System Object ID
System Contact
SysLocation
Read Community String Enter the SNMP read community string, which identifies the valid read
Primary Trap Receiver
Secondary Trap
Receiver
Cisco Video Surveillance 2500 Series IP Camera User Guide
3-34
Event Window Options (continued)
Description
Length, in seconds, of additional video that is included in the video file
immediately before the event.
The default value is 0 (no pre-capture video).
Length, in seconds, of additional video that is included in the video file
immediately after the event.
The default value is 5.
2-6, click Applications, then click SNMP.
describes the options in the SNMP window.
SNMP Window Options
Description
Check this check box to enable SNMP.
Display only. Displays the system object ID, which identifies system
properties of the IP camera.
Enter system contact information for the system administrator. For example,
enter the e-mail address of the system administrator.
Enter system location information, which identifies the physical location of
the IP camera.
community.
The default value is public (all lower case).
Enter the IP address of primary trap receiver of the SNMP manager.
Enter the IP address of secondary trap receiver of the SNMP manager.
Chapter 3 Configuring and Managing the IP Camera
"Accessing the IP
OL-19273-02