Cisco 2500 Series User Manual page 67

Chapter 3 Configuring and Managing the IP Camera
Table 3-26
Message
Stream: RTSP stream started. [ip: Type, UDP:
Address_1:Port_1 -> Address_2:Port_2, User]
Stream: RTSP stream stopped. [ip: Type, UDP:
Address_1:Port_1 -> Address_2:Port_2, User]
successful admin user login.
successful view only user login.
System: Cancel upgrade process
System: Invalid upgrade file
System: Reset to factory defaults.
Unsuccessful login attempt.
Web: Invalid login attempt. [id: User_ID, ip:
Address]
Web: User logged in to web UI. [id: User_ID, ip:
Address]
Web: User logged out from web UI. [id: User_ID,
ip: Address]
Wireless: Link down by AP when receiving
DeAuth.
Wireless: Link down by STA when changing
SSID.
Wireless: Link down when losing BEACON.
Wireless: Link up.
OL-19273-02
Syslog and Log Information (continued)
Explanation
Provides information when an RTSP stream from
the IP camera is initiated (RTSP stream started) or
stopped (RTSP stream stopped).
Type is the type of stream (Video or Audio).
Address_1:Port_1 are the IP address and port
number of the IP camera. Address_2:Port_2 are IP
address and port number of the device that
receives the stream. User is the IP camera user
name of the user who started or stopped the
stream.
A user with administrator privileges logged in to
the IP camera.
A user with viewer privileges or monitor
privileges logged in to the IP camera.
An IP camera administrator cancelled a firmware
upgrade that was in process.
You are attempting to upgrade firmware for the IP
camera but are using and invalid firmware file.
Factory reset procedure performed for the IP
camera.
A user tried but was unable to log in to the IP
camera.
Provides information when someone logs in, or
attempts to log in, to the IP camera.
User is the IP camera user name of the user.
Address is the IP address of the PC that was used.
Wireless IP camera cannot communicate with the
access point.
A user is changing the SSID for the wireless IP
camera.
Wireless IP camera cannot communicate with the
access point because the access point is shutting
down.
Wireless IP camera established connection to the
access point.
Cisco Video Surveillance 2500 Series IP Camera User Guide
Status Windows
3-45