Cisco 2500 Series User Manual page 51

Chapter 3 Configuring and Managing the IP Camera
To display the Mail & FTP window, access the configuration windows as described in the
the IP Camera Windows" section on page
If you change any options in the Mail & FTP window, you must click Save to save the changes. To
discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the
window. You may need to scroll down to see them.
Table 3-15
Table 3-15
Option
Primary SMTP Server
Primary SMTP
SMTP Mail Server
Authentication
Account Name
Password
POP Server Name
Secondary SMTP Server
Secondary SMTP
SMTP Mail Server
Authentication
Account Name
Password
POP Server Name
E-Mail Setup
Send To
Show "From" as
Subject
OL-19273-02
describes the options in the Mail & FTP window.
Mail & FTP Window Options
Description
Check this check box to cause e-mail messages to be sent to the primary
Simple Mail Transport Protocol (SMTP) server.
Enter the name or IP address of the primary SMTP server.
If you enter a name, you must configure the Primary DNS option as
described in the
If the primary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
If the primary SMTP server requires authentication, enter the account name
for the server.
If the primary SMTP server requires authentication, enter the account
password for the server.
Enter the name of the POP3 mail server that you use to receive e-mail.
Check this check box to cause e-mail messages to be sent to a secondary
(backup) SMTP server if the primary SMTP server is unavailable.
Enter the IP address of the secondary SMTP server.
If the secondary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
If the secondary SMTP server requires authentication, enter the account
name for the server.
If the secondary SMTP server requires authentication, enter the account
password for the server.
Enter the name of the POP3 mail server that you use to receive e-mail.
Enter at least 1 e-mail address to which e-mail messages are sent when an
event occurs. The second and third addresses are optional.
Enter the e-mail address to be shown in the From field for e-mail messages
that are sent when an event occurs.
Enter the text to be shown in the Subject field for the e-mail messages that
the IP camera sends when events occur. The subject can contain up to 48
characters, including spaces.
2-6, click Applications, then click Mail & FTP.
"Basic Setup Window" section on page
Cisco Video Surveillance 2500 Series IP Camera User Guide
Applications Windows
"Accessing
3-5.
3-29