Chapter 8 - Using Call Manager Features; Call Handling Features; Making Outgoing Calls - Toshiba VIPedge IP5131-SDL User Manual

Using Call Manager Features
Call Handling
Features
Making Outgoing
Calls
VIPedge UG 07/12
This chapter defines how to use the VIPedge features using Call Manager.
Features included are Call Handling, System and Microsoft Outlook features.
Personal Call Handler (PCH) rules can be created to respond and take actions on
calls automatically, or Programmable Buttons can be used for even easier access
to many features.
Call Handling features include how to dial, answer, hold, transfer and hang up
calls. It also includes how to view the Extra Call Information when attached to a
call.
Call Manager supports a number of ways to place calls including open
architecture links to other programs or contact managers, which can also be used
to dial calls. The following are some of the typical ways to place a call using Call
Manager. Most of these functions are found on the Call Manager Home tab.
Manual On-screen Dialing
1. Click within the dial number box and enter the number from the keyboard
(shown below).
2. Press Enter when done to start the number to be dialed.
Re-dial a Recently Used Number
1. Pull down the list of numbers in the dial number box and select the number to
dial.
2. Click the Make Call button to dial.
Using Call Manager Dialpad
1. Click the dialpad button
2. Enter the number to be dialed including a trunk access code; the call will
proceed automatically once a valid number is entered.
TOSHIBA
Dial Number Box
to expose the dialpad.
8
77