Displaying And Assigning Call Charges; Displaying Call Charges (Not For U.s.) - Siemens HiPath 3000 Operating Instructions Manual
Hide thumbs
Also See for HiPath 3000:
- Service manual (1144 pages) ,
- Operating instruction (176 pages) ,
- User manual (165 pages)
Table of Contents
Advertisement
Displaying and Assigning Call Charges
Step by Step
Program/Service
*
65=Show call charges?
44
Displaying and Assigning Call
Charges
Displaying Call Charges (Not for U.S.)
For the current call:
The display usually shows call charges at the end of a
call (default setting).
If you wish to display charges continuously during a call
in progress, your service personnel must request this
feature from your carrier.
Some carriers also let you display toll-free external calls.
The message "Free of Charge" appears on the screen ei-
ther before or during the call.
For all calls and the last one conducted:
The connection charges for the last chargeable call con-
ducted are displayed first. Five seconds later, the total
accumulated connection charges appear.
Press the key. The LED lights up.
Select and confirm.
or
F?>
Enter the code.
If a call is transferred, the charges are assigned to
the telephone to which the call was transferred.
Advertisement
Table of Contents
